As far as I know you can't use two different configurations on the same webserver, so in that case you'll need to run the two webapplications on two different webservers.
Regards
Thomas
-----Oprindelig meddelelse-----
Fra: [email protected] [mailto:[EMAIL PROTECTED] På vegne af Karsten Wollesen
Sendt: 11. juli 2005 11:26
Til: [email protected]
Emne: RE: [development-axapta] Setting up multiple portal on single machine
Hi,
You can setup which Axapta configuration file the COM connector should
use. (path: Administration\Setup\Internet\Web Sites\Setup-tab page)
Regards,
Karsten Wollesen Clausen
Thy Data Center Development A/S
________________________________
From: [email protected]
[mailto:[EMAIL PROTECTED] On Behalf Of Anil Ozay
Sent: 11. juli 2005 09:57
To: [email protected]
Subject: [development-axapta] Setting up multiple portal on single
machine
Hi all.. We have trouble about setting up multiple portals on a single
machine. We have two seperate applications, so that two seperate
configurations.
One configuration is run normally, but when we start another web
application, it causes en error message :
AxaptaCOMConnector.Axapta.1 (0x80041004)
Axapta Business Connector is connected to another MBS Axapta System.
So that you can not logon to specified system.
How can i solve this problem?? This is very important..
Thanks
________________________________
YAHOO! GROUPS LINKS
* Visit your group "development-axapta
<http://groups.yahoo.com/group/development-axapta> " on the web.
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]
be>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .
________________________________
[Non-text portions of this message have been removed]
Yahoo! Groups Links
YAHOO! GROUPS LINKS
- Visit your group "development-axapta" on the web.
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
