Hi Matthijs, here my feedback with the few issues i found when testing with the La Fonera 2.0g using the new firmware:
1) Wireless bridge mode not successful. When I tried to connect the La Fonera 2.0g to the La Fonera 2.0n using the wireless bridge mode the 2.0g couldn't connect to the 2.0n. The result was the the 2.0g was like bricked and when connecting viathe LAN to the 2.0g I could only see it as 169.254.255.1. So I had to hard reset the 2.0g to get access again to the GUI. Could you please reply with a working config you filled in the wireless bridge mode GUI mask with telling which settings are according to which values from the wireless network used as dhcp and gateway. 2) No login/password on LAN connection during 169.254.255.1 IP mode. When the 2.0g struggled to connect in wireless bridge mode it was only possible to connect to it via the LAN port and using the 169.254.255.1 IP for the router. But unfortunately no login/password was possible to use (admin/setpasswd NOK, root/setpasswd NOK, admin/serial-number NOK, root/serial-number NOK). Please paste the information about the correct login/password on LAN connection during 169.254.255.1 IP mode if possible to the Wiki page. Best regards and thanx again for the great firmware. Regards, Kyros _______________________________________________ Development mailing list [email protected] http://fonosfera.org/mailman/listinfo/development
