On Sun, Feb 26, 2012 at 11:00:38AM +0000, Ian Campbell wrote: > On Thu, 2012-02-23 at 19:52 +0000, Jason Cooper wrote: > > This patch series provides initial support for devicetree on kirkwood for > > the > > dreamplug platform. After discussing the approach with Arnd Bergman last > > week > > at ELC, we decided to take an incremental approach to the conversion. > > First, I > > would detect that we were on the dreamplug via the devicetree blob. Then, > > configure uart0 via devicetree. We chose the uart since it is already well > > supported under devicetree. > > > > This patch series has been boot-tested on the dreamplug. > > Tested-by: Ian Campbell <[email protected]>
thanks! > I needed the following (obvious) patch against u-boot: yes, I forgot to mention that. By any chance, have you tested booting non-fdt kernels from u-boot with this option enabled? I'm fairly sure it will work, but I haven't tested it myself. If you can boot both fdt and non-fdt kernels with this enabled, submit it to u-boot, CC: Prafulla, and I'll ack it. thx, Jason. > diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h > index 0f2f9a2..76f9eea 100644 > --- a/include/configs/dreamplug.h > +++ b/include/configs/dreamplug.h > @@ -148,4 +148,6 @@ > */ > #define CONFIG_DISPLAY_CPUINFO > > +#define CONFIG_OF_LIBFDT > + > #endif /* _CONFIG_DREAMPLUG_H */ > > > Ian. > > _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
