Signed-off-by: Uwe Kleine-König <[email protected]>
---
Documentation/devicetree/bindings/mtd/atmel-nand.txt | 2 +-
Documentation/devicetree/bindings/mtd/partition.txt | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index a200695..0c1bccd 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -3,7 +3,7 @@ Atmel NAND flash
Required properties:
- compatible : "atmel,at91rm9200-nand".
- reg : should specify localbus address and size used for the chip,
- and if availlable the ECC.
+ and if available the ECC.
- atmel,nand-addr-offset : offset for the address latch.
- atmel,nand-cmd-offset : offset for the command latch.
- #address-cells, #size-cells : Must be present if the device has sub-nodes
diff --git a/Documentation/devicetree/bindings/mtd/partition.txt
b/Documentation/devicetree/bindings/mtd/partition.txt
index f114ce1..6e1f61f 100644
--- a/Documentation/devicetree/bindings/mtd/partition.txt
+++ b/Documentation/devicetree/bindings/mtd/partition.txt
@@ -35,4 +35,4 @@ flash@0 {
uimage@100000 {
reg = <0x0100000 0x200000>;
};
-];
+};
--
1.7.10
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
