On 04/23/2012 03:57 AM, Uwe Kleine-König wrote:
> Signed-off-by: Uwe Kleine-König <[email protected]>
> ---
Applied for 3.6.
Rob
> Documentation/devicetree/bindings/mtd/atmel-nand.txt | 2 +-
> Documentation/devicetree/bindings/mtd/partition.txt | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> index a200695..0c1bccd 100644
> --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> @@ -3,7 +3,7 @@ Atmel NAND flash
> Required properties:
> - compatible : "atmel,at91rm9200-nand".
> - reg : should specify localbus address and size used for the chip,
> - and if availlable the ECC.
> + and if available the ECC.
> - atmel,nand-addr-offset : offset for the address latch.
> - atmel,nand-cmd-offset : offset for the command latch.
> - #address-cells, #size-cells : Must be present if the device has sub-nodes
> diff --git a/Documentation/devicetree/bindings/mtd/partition.txt
> b/Documentation/devicetree/bindings/mtd/partition.txt
> index f114ce1..6e1f61f 100644
> --- a/Documentation/devicetree/bindings/mtd/partition.txt
> +++ b/Documentation/devicetree/bindings/mtd/partition.txt
> @@ -35,4 +35,4 @@ flash@0 {
> uimage@100000 {
> reg = <0x0100000 0x200000>;
> };
> -];
> +};
>
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
