On Wed, May 22, 2013 at 1:12 AM, Linus Walleij
<[email protected]> wrote:
> From: Linus Walleij <[email protected]>
>
> Based on pending device tree support in the LP55xx drivers
> we can add the correct LED and channel configuration from the
> ux500 device tree for all HREF variants.
>
> Cc: Milo Kim <[email protected]>
> Cc: Bryan Wu <[email protected]>
> Signed-off-by: Linus Walleij <[email protected]>
> ---
> arch/arm/boot/dts/href.dtsi | 38 ++++++++++++++++++++++++++++++++------
> 1 file changed, 32 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
> index 62523f6..e315429 100644
> --- a/arch/arm/boot/dts/href.dtsi
> +++ b/arch/arm/boot/dts/href.dtsi
> @@ -63,16 +63,42 @@
> };
>
> i2c@80128000 {
> - lp5521@0x33 {
> - compatible = "lp5521";
> + lp5521@33 {
Is this right, I guess it should be still "lp5521@0x33", although it's
just a name.
-Bryan
> + compatible = "national,lp5521";
> reg = <0x33>;
> + label = "lp5521_pri";
> + clock-mode = /bits/ 8 <2>;
> + chan0 {
> + led-cur = /bits/ 8 <0x2f>;
> + max-cur = /bits/ 8 <0x5f>;
> + };
> + chan1 {
> + led-cur = /bits/ 8 <0x2f>;
> + max-cur = /bits/ 8 <0x5f>;
> + };
> + chan2 {
> + led-cur = /bits/ 8 <0x2f>;
> + max-cur = /bits/ 8 <0x5f>;
> + };
> };
> -
> - lp5521@0x34 {
> - compatible = "lp5521";
> + lp5521@34 {
> + compatible = "national,lp5521";
> reg = <0x34>;
> + label = "lp5521_sec";
> + clock-mode = /bits/ 8 <2>;
> + chan0 {
> + led-cur = /bits/ 8 <0x2f>;
> + max-cur = /bits/ 8 <0x5f>;
> + };
> + chan1 {
> + led-cur = /bits/ 8 <0x2f>;
> + max-cur = /bits/ 8 <0x5f>;
> + };
> + chan2 {
> + led-cur = /bits/ 8 <0x2f>;
> + max-cur = /bits/ 8 <0x5f>;
> + };
> };
> -
> bh1780@0x29 {
> compatible = "rohm,bh1780gli";
> reg = <0x33>;
> --
> 1.7.11.3
>
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
