Hello Marc,
I'm not really familiar with the naming concept in device trees.
What is your opinion about the remarks below?
Regards,
Oliver
On 30.06.2014 10:26, Dong Aisheng wrote:
> On Fri, Jun 27, 2014 at 08:03:20PM +0200, Oliver Hartkopp wrote:
>>> + for each elements definition.
>>> +
>>> +Example:
>>> +canfd1: canfd@020e8000 {
>> ^^^^^^ ^^^^^
>>
>> There's no reason to name this canfd. The fact that the controller supports
>> CAN FD is provided by priv->ctrlmode_supported and the CAN_CTRLMODE_FD bit.
>>
>
> Just because mx6sx spec calling it CANFD at many places.
> e.g.
> Interrupts:
> 146 CANFD1 CANFD1 interrupt request
> 147 CANFD2 CANFD2 interrupt request
> Memory Map:
> 020F_0000 020F_3FFF CANFD2 16 KB
> 020E_8000 020E_BFFF CANFD1 16 KB
> So i used canfd firstly.
> CCM:
> CANFD
> ips_clk can_clk_root CCGR1[CG15] (canfd_clk_enable)
> m_can_0_cclk can_clk_root CCGR1[CG15] (canfd_clk_enable)
> m_can_0_ips_clk can_clk_root CCGR1[CG15] (canfd_clk_enable)
>
>> Just write
>>
>> can1: can@020e8000 {
>>
>
> I'm ok with this style.
> Maybe the following is better:
> m_can1: can@020e8000 {
>
>>> + compatible = "bosch,m_can";
>>> + reg = <0x020e8000 0x4000>, <0x02298000 0x4000>;
>>> + reg-names = "canfd", "message_ram";
>> ^^^^^
>> dito.
>>
> How about m_can?
> Since it's IP driver, not depends on how SoC naming it.
>
>>> + interrupts = <0 114 0x04>;
>>> + clocks = <&clks IMX6SX_CLK_CANFD>;
>> ^^^^^
>> dito.
>>
>
> Not for this one, because imx6sx spec calling it CANFD in Clock
> chaptor.
> We want to align with our spec since it's arch code.
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
