On Wed, Jul 02, 2014 at 09:13:07PM +0200, Marc Kleine-Budde wrote:
> On 07/02/2014 07:54 PM, Oliver Hartkopp wrote:
> > I'm not really familiar with the naming concept in device trees.
> >
> > What is your opinion about the remarks below?
>
> The entries in the DT, at least on freescale baords, follow the naming
> scheme of the reference manual. E.g. on the mx25 it's can1 and can2:
>
> can1: can@43f88000 { ... }
> can2: can@43f8c000 { ... }
>
> And on the mx28, its:
>
> can0: can@80032000 { ... }
> can1: can@80034000 { ... }
>
> Because the imx25 datasheet uses a "1" based counting scheme, while the
> imx28 uses a "0" based one.
>
> So it's best practise to follow the naming and numbering scheme of the
> hardware reference manual.....and if you have access to the
> documentation of the m_can core, use clock names of the m_can core for
> the clock-names property.
>
Based on my knowledge, device tree allows define phandle name according to
the real device name of HW according spec while the device node name should
be general(e.g can@80032000 rather than flexcan@80032000).
For imx6sx, there are already following entries in
arch/arm/boot/dts/imx6sx.dtsi
flexcan1: can@02090000 {...}
flexcan2: can@02094000 {...}
So i'd prefer to define as:
m_can1: canfd@020e8000 {...}
m_can2: canfd@020f0000 {...}
One problem is there're can alias already.
aliases {
can0 = &flexcan1;
can1 = &flexcan2;
...
}
I'm not sure adding can2&can3 for mcan is properly:
aliases {
can0 = &flexcan1;
can1 = &flexcan2;
can2 = &m_can1;
can3 = &m_can2;
...
}
Since the m_can driver does not need to use aliases,
so i will not add them.
Regards
Dong Aisheng
> Marc
> --
> Pengutronix e.K. | Marc Klein-Budde |
> Industrial Linux Solutions | Phone: +49-231-2826-924 |
> Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
> Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
