At 09.54 12/05/2002 +1200, you wrote: >Has anyone had any luck setting up an e-smith box with an internal ADSL >itex chipset modem?.
I use Dlink PCI adsl card with itex chipset and works fine, i've tested this card only with RFC 1483 protocol and Dlink drivers (based on itex drivers). I only get a kernel version mismatch between 2.2.16 and 2.2.19, but there isn't problems. >I have drivers for the itex chipset for kernel 2.4.2, 2.2.16, 2.2.14. >Unfortunately >itex will not release the source so were stuck with the binary kernel. >the bin's were complied for RH7.1 > >I tried to set them up but was unable to get them working, I think I got the >adapter working and it appeared as a network card after the core drivers >were >loaded but I could not get pppd to communicate properly. > >Just seems that it would be a nice solution to have the internal ADSL as the >external network adapter and another network card as the internal. On box >does it all :). > >Regards >Andrew > > >-- >Please report bugs to [EMAIL PROTECTED] >Please mail [EMAIL PROTECTED] (only) to discuss security issues >Support for registered customers and partners to [EMAIL PROTECTED] >To unsubscribe, e-mail: [EMAIL PROTECTED] >For additional commands, e-mail: [EMAIL PROTECTED] >Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
