*** From dhcp-server -- To unsubscribe, see the end of this message. ***
>> The multi-nic system is supposed to *be* the router, but the DHCP
>> server is on the eth2 segment. There's no way to get both eth0 and eth2
>> to get DHCP info from eth2?
>
>I don't understand. Do you want to get IP addresses for eth0 and
>eth2 from the DHCP server, or do you want clients connected to eth2 to
>get addresses from the DHCP server connected to eth0? If the latter,
>just run a relay agent on your router.
>
I wanted to get addresses for eth0 and eth2 over the eth2 interface.
Sorry, I should have been more specific.
>> Also, do you have any plans to support DHCP aliases? Specifically, I'm
>> not sure what else besides Linux supports that, but it can't hurt to
>> ask... I needed to see if I could get multiple IP's for one address, or
>> addresses for multiple devices from one interface, primarily for cable
>> modem configurations.
>
>What do you mean, "support DHCP aliases"?
It must be no-brain day for me... What I meant was can/will DHCP get
addresses for IP aliasing, like eth0:0 and eth0:1, etc.
>
>> Finally, I need to set the network card to promiscuous mode.
>> Is there an option or location within the config script that I could
>> quickly change to do this?
>
>Why would you want to do this?
Bridging, and catching packets.
>
> _MelloN_
By the way, have you ever heard of Samba not running on a DHCP system?
I keep getting "Unable to bind to socket 139: Address 0.0.0.0:139
already in use." It works fine on a non-DHCP system, but I wanted my
DHCP and Samba to be the same system.
------------------------------------------------------------------------------
To unsubscribe from this list, please visit http://www.fugue.com/dhcp/lists
If you are without web access, or if you are having trouble with the web page,
please send mail to [EMAIL PROTECTED] Please try to use the web
page first - it will take a long time for your request to be processed by hand.
------------------------------------------------------------------------------
