*** From dhcp-server -- To unsubscribe, see the end of this message. ***
Correct me if I'm wrong, but it's not possible to start the server on an
unconfigured interface
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
> Behalf Of Diamon
> Sent: Monday, April 05, 1999 8:19 PM
> To: Ted Lemon
> Cc: [EMAIL PROTECTED]
> Subject: Re: Relay/client question.
>
>
> *** From dhcp-server -- To unsubscribe, see the end of this
> message. ***
>
> >> The multi-nic system is supposed to *be* the router, but the DHCP
> >> server is on the eth2 segment. There's no way to get both
> eth0 and eth2
> >> to get DHCP info from eth2?
> >
> >I don't understand. Do you want to get IP addresses for eth0 and
> >eth2 from the DHCP server, or do you want clients connected to eth2 to
> >get addresses from the DHCP server connected to eth0? If the latter,
> >just run a relay agent on your router.
> >
>
> I wanted to get addresses for eth0 and eth2 over the eth2 interface.
> Sorry, I should have been more specific.
>
> >> Also, do you have any plans to support DHCP aliases?
> Specifically, I'm
> >> not sure what else besides Linux supports that, but it can't hurt to
> >> ask... I needed to see if I could get multiple IP's for one
> address, or
> >> addresses for multiple devices from one interface, primarily for cable
> >> modem configurations.
> >
> >What do you mean, "support DHCP aliases"?
>
> It must be no-brain day for me... What I meant was can/will DHCP get
> addresses for IP aliasing, like eth0:0 and eth0:1, etc.
>
> >
> >> Finally, I need to set the network card to promiscuous mode.
> >> Is there an option or location within the config script that I could
> >> quickly change to do this?
> >
> >Why would you want to do this?
>
> Bridging, and catching packets.
>
> >
> > _MelloN_
>
> By the way, have you ever heard of Samba not running on a
> DHCP system?
> I keep getting "Unable to bind to socket 139: Address 0.0.0.0:139
> already in use." It works fine on a non-DHCP system, but I wanted my
> DHCP and Samba to be the same system.
>
>
> ------------------------------------------------------------------
> ------------
> To unsubscribe from this list, please visit
> http://www.fugue.com/dhcp/lists
> If you are without web access, or
> if you are having trouble with the web page,
> please send mail to [EMAIL PROTECTED] Please try to use the web
> page first - it will take a long time for your request to be
> processed by hand.
> ------------------------------------------------------------------
> ------------
>
------------------------------------------------------------------------------
To unsubscribe from this list, please visit http://www.fugue.com/dhcp/lists
If you are without web access, or if you are having trouble with the web page,
please send mail to [EMAIL PROTECTED] Please try to use the web
page first - it will take a long time for your request to be processed by hand.
------------------------------------------------------------------------------
