Re: [digitalradio] Rigblaster & Yaesu FT7800R

[Jim Clark]

I am using a Rig Blaster with my Yaesu FT100 and it works fine. The first thing I would check is to make sure that there is output from the sound card. This can easily be checked by plugging a speaker into the sound card at the same location you are plugging the audio cable going to the Rig Blaster. If you can’t get audio in the speaker then the sound card audio out needs set up. Go to the audio controls for the sound card and make sure you have the Wav and audio out turned up. Also make sure these are not muted. If your computer has more than one sound card make sure the correct one is selected in the software you are running. Jim ----- Original Message ----- From: jtwoodstock To: digitalradio@yahoogroups.com Sent: Saturday, July 30, 2005 11:43 PM Subject: [digitalradio] Rigblaster & Yaesu FT7800R Anyone get these two to work together? I bought the special cable, wired the jumpers the way that it said on the paper included with the cable.. The PTT seems to work, but no audio.. Any thoughts? The K3UK DIGITAL MODES SPOTTING CLUSTER AT telnet://208.15.25.196/ More info at http:///www.obriensweb.com SPONSORED LINKS Craft hobby Hobby and craft supply Ham radio YAHOO! GROUPS LINKS  Visit your group "digitalradio" on the web.    To unsubscribe from this group, send an email to:  [EMAIL PROTECTED]    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.