Hi,

I am fairly newbie with DirectFB. However I have a M1000 which I had used 
viafb and DirectFB-rc2 succesfully. I use VGA output.
My kernel is 2.6.17.13.

By the latest cvs of all DirectFB and linux-viafb I can not see a proper VGA 
out but only "Vertical White Lines". 
fb.modes that comes with linux-viafb is in /etc when inserting the viafb 
module. df_dok and df_xine seems to be working properly in ssh but there is 
no VGA output but only vertical white lines.

Here are my various the outputs.

* dmesg:

        viafb: VIA UNICHROME framebuffer 1.0 initializing
        viafb: viafb : CEA80000
        viafb: framebuffer size = 32 Mb
        viafb: Found Device Rev:0
        viafb: X:720 Y:576
        viafb: mode=720  bpp=32  refresh=255  TVon=0  TVtype=2
        viafb: VQ start:1FC0000  end:1FFFFFF  size:40000
        viafb: Cursor start:1FBF000  end:1FBFFFF  size:1000
        viafb: mode=720  bpp=32  refresh=255  TVon=0  TVtype=2
        viafb: irq handler installed, IRQ(0x200) = 80080c02     
        Console: switching to colour frame buffer device 90x36
        fb0: UNICHROME frame buffer device

* fbset -i

$ ./fbset -i

mode "720x576-74"
    # D: 41.475 MHz, H: 44.693 kHz, V: 74.488 Hz
    geometry 720 576 720 1152 32
    timings 24111 88 32 16 4 88 4
    rgba 8/16,8/8,8/0,8/24
endmode

Frame buffer device information:
    Name        : UNICHROME
    Address     : 0xd8000000
    Size        : 33288192
    Type        : PACKED PIXELS
    Visual      : TRUECOLOR
    XPanStep    : 0
    YPanStep    : 1
    YWrapStep   : 0
    LineLength  : 2880
    MMIO Address: 0xdc000000
    MMIO Size   : 16777216
    Accelerator : Unknown (77)



* df_dok
 $ df_dok

     =======================|  DirectFB 1.0.0-rc3  |=======================
          (c) 2001-2006  United Cultures of Earth - go for outer space!
          (c) 2000-2004  Convergence (integrated media) GmbH
        ----------------------------------------------------------------

(*) DirectFB/Core: Multi Application Core. (2007-02-05 15:34)
(*) Fusion/SHM: Not using MADV_REMOVE (2.6.17.13 < 2.6.19.2)!
(*) Direct/Thread: Running 'Fusion Dispatch' (MESSAGING, 1360)...
(*) Direct/Thread: Running 'PS/2 Input' (INPUT, 1361)...
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (directfb.org)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: VIA/S3G CLE266/UniChrome 0.4 (-)
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
(*) Direct/Interface: Loaded 'PNG' implementation of 'IDirectFBImageProvider'.
(*) Direct/Interface: Loaded 'FT2' implementation of 'IDirectFBFont'.
(*) Direct/Interface: Using 'GIF' implementation of 'IDirectFBImageProvider'.

Benchmarking with 256x256 in 24bit mode... (32bit)

Anti-aliased Text                              3.007 secs (* 278.949 
KChars/sec)
Anti-aliased Text (blend)                      3.007 secs (* 278.949 
KChars/sec)
Fill Rectangle                                 3.002 secs (* 471.544 
MPixel/sec)
and so on....

Thanks in advance,

George Yil



_______________________________________________
directfb-users mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users

Reply via email to