Hi! After a LOT of playing around, I hope you can help me. I try to get "fbxine" in combination with DirectFB running. I use a Matrox G400 DH, which is connected with a VGA-SCART-cable to my TV (special cable, just for the G400 second head, which can also work as a TV-OUT port).
When I configure fbxine/directfb to use the first head (VGA-monitor), videos are displayed as they should. But when the video should be displayed on the second head (TV-OUT) there is some flickering and then just a black screen on the TV. That means that there is some kind of signal on the SCART-interface, otherwise the TV would display a blue screen (no signal on SCART). There are no error messages or something like that. A SDL/directfb application had no problems to display something on the TV-OUT, also "mplayer -vo dfbmga" works. Unfortunately I need xine, because of special postprocessing plugins. So df_xine cant be used either (doesnt support xine postprocessing plugins on the command-line), although it works. Regarding to the following mail http://mail.directfb.org/pipermail/directfb-users/2006-January/001390.html my configuration files are: /etc/directfbrc: no-banner primary-layer=2 matrox-crtc2 matrox-tv-standard=pal ~/.xine/config: video.device.directfb_layer_id:0 Drivers in use: modprobe matroxfb_base modprobe i2c-dev modprobe matroxfb_crtc2 (also tried without this driver) I use Debian 4.0 Etch, which contains the following versions: DirectFB 0.9.25 Xine-lib 1.1.2 Perhaps someone has a hint for me or knows an alternative method to get fbxine with DirectFB running. THANKS!! Best regards, Michael. -- Ist Ihr Browser Vista-kompatibel? Jetzt die neuesten Browser-Versionen downloaden: http://www.gmx.net/de/go/browser _______________________________________________ directfb-users mailing list [email protected] http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
