On Wed, Aug 29, 2007 at 08:38:36PM +0200, Michael Hofer wrote: > Hi! > > After a LOT of playing around, I hope you can help me. > I try to get "fbxine" in combination with DirectFB running. I use a Matrox > G400 DH, which is connected with a VGA-SCART-cable to my TV (special cable, > just for the G400 second head, which can also work as a TV-OUT port). > > When I configure fbxine/directfb to use the first head (VGA-monitor), videos > are displayed as they should. But when the video should be displayed on the > second head (TV-OUT) there is some flickering and then just a black screen on > the TV. That means that there is some kind of signal on the SCART-interface, > otherwise the TV would display a blue screen (no signal on SCART). > There are no error messages or something like that. > > A SDL/directfb application had no problems to display something on the > TV-OUT, also "mplayer -vo dfbmga" works. Unfortunately I need xine, because > of special postprocessing plugins. So df_xine cant be used either (doesnt > support xine postprocessing plugins on the command-line), although it works. > > Regarding to the following mail > http://mail.directfb.org/pipermail/directfb-users/2006-January/001390.html > my configuration files are: > > /etc/directfbrc: > no-banner > primary-layer=2 > matrox-crtc2 > matrox-tv-standard=pal
matrox-cable-type=scart-rgb -- Ville Syrjälä [EMAIL PROTECTED] http://www.sci.fi/~syrjala/ _______________________________________________ directfb-users mailing list [email protected] http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
