Your pc must have 1000Mbps port. The 10/100Mbps won't work. An alternative is to connect a 10/100/1000 LAN switch between your pc and the USRP.
Rgds, activecat. On Mon, Oct 21, 2013 at 12:37 PM, Sandhya G <[email protected]> wrote: > HI all, > > > I have followed as per the instructions given in the webpage for set up of > the Usrp N200/N210 but still i am unable to communicate between the > hardware and host pc > > > > 1.I have set the static ip of the host pc to > 192.168.10.1(ifconfig eth0 192.168.10.1). > > 2.Whenever i give the device address=addr=192.168.10.1 and run the grc i > am getting the error has “*unknown key format*” > > 3.Whenever i ping 192.168.10.2 or use the command uhb_find_device i am > getting warning as “*NO DEVICE FOUND* “ > > 4. Is that a must i have to upload the fpga and firmware images when using > the device for the first time. > > 5.Sometimes i am getting an error like”* unable to find as single device”. > * > > *6.*The* *host pc is supporting only 10/100MBPS .Is that the only problem > so that i am unable to communicate with the hardware. > > > > Can anybody help me on this issue.Awaiting for your valuable reply > > > Thanks in advance > > Sandhya.G > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > >
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
