Hi Nicolas, Thanks for your time. I did that but the result is same. I can run
$ uhd_images_downloader but $ gnuradio-companion fails. Let me know if any further information is needed. Thanks -- Usman On Wed, Jan 18, 2017 at 2:11 PM, Nicolas Cuervo <nicolas.cue...@ettus.com> wrote: > Hello Usman, > > Did you set up your PyBOMBS environment? If not, please do so. As long as > I understand your prefix is at ~/rfnoc. Being that the case, please run: > > $ source ~/rfnoc/setup_env.sh > > After this your shell will have access to everything which has been > installed in that prefix, and you should be able to start > gnuradio-companion. Please have in mind that you have to set up this > environment in every new shell you start. > > Please let us know if this doesn't work so that we can look further into > it. > > Cheers, > > - Nicolas > > On Wed, Jan 18, 2017 at 9:58 AM, Usman Haider <usmanhaide...@gmail.com> > wrote: > >> Yes, could be the cause. After running the following commands >> >> $ cd ~/rfnoc >> $ source ./setup_env.sh >> $ uhd_images_downloader >> >> I was able to download the images. But when I tried to run >> >> $ gnuradio-companion >> >> It failed giving "The program 'gnuradio-companion' is currently not >> installed. You can install it by typing: sudo apt-get install gnuradio". >> Although, I have >> >> $ gnuradio-config-info --v >> v3.7.10.1-202-g6225e5d4 >> >> $ gnuradio-config-info --prefix >> /home/emb/rfnoc >> >> Otuput of PyBOMBS is as under. >> >> $ pybombs prefix init ~/rfnoc -R rfnoc -a rfnoc >> PyBOMBS - INFO - PyBOMBS Version 2.3.1a >> PyBOMBS.prefix - INFO - Creating directory `/home/emb/rfnoc' >> Alias `rfnoc' already exists, overwrite Y/[N]? y >> PyBOMBS.ConfigManager - INFO - Creating new config file >> /home/emb/rfnoc/.pybombs/config.yml >> PyBOMBS.prefix - INFO - Installing default packages for prefix... >> PyBOMBS.prefix - INFO - >> - gnuradio >> - uhd >> - gr-ettus >> - uhd-fpga >> PyBOMBS.install_manager - INFO - Phase 1: Creating install tree and >> installing binary packages: >> DEPRECATION: The default format will switch to columns in the future. You >> can use --format=(legacy|columns) (or define a format=(legacy|columns) in >> your pip.conf under the [list] section) to disable this warning. >> Install tree: >> | >> +- uhd-fpga >> | >> \- gr-ettus >> | >> +- uhd >> | >> \- gnuradio >> | >> +- uhd >> | >> \- apache-thrift >> PyBOMBS.install_manager - INFO - Phase 2: Recursively installing source >> packages to prefix: >> PyBOMBS.install_manager - INFO - Installing package: apache-thrift >> Cloning: (100%) [============================= >> ============================]] >> Cloning: (100%) [============================= >> ============================] >> Configuring: (100%) [============================= >> ============================] >> Building: (100%) [============================= >> ============================] >> Installing: (100%) [============================= >> ============================] >> PyBOMBS.install_manager - INFO - Installation successful. >> PyBOMBS.install_manager - INFO - Installing package: uhd >> Cloning: (100%) [============================= >> ============================]] >> Configuring: (100%) [============================= >> ============================] >> Building: (100%) [============================= >> ============================] >> Installing: (100%) [============================= >> ============================] >> PyBOMBS.install_manager - INFO - Installation successful. >> PyBOMBS.install_manager - INFO - Installing package: gnuradio >> Cloning: (100%) [============================= >> ============================]] >> Configuring: (100%) [============================= >> ============================] >> Building: (100%) [============================= >> ============================] >> Installing: (100%) [============================= >> ============================] >> PyBOMBS.install_manager - INFO - Installation successful. >> PyBOMBS.install_manager - INFO - Installing package: gr-ettus >> Cloning: (100%) [============================= >> ============================] >> Configuring: (100%) [============================= >> ============================] >> Building: (100%) [============================= >> ============================] >> Installing: (100%) [============================= >> ============================] >> PyBOMBS.install_manager - INFO - Installation successful. >> PyBOMBS.install_manager - INFO - Installing package: uhd-fpga >> Cloning: (100%) [============================= >> ============================]] >> Configuring: (100%) [============================= >> ============================] >> Building: (100%) [============================= >> ============================] >> Installing: (100%) [============================= >> ============================] >> PyBOMBS.install_manager - INFO - Installation successful. >> >> >> Any pointers? :) >> >> -- >> Usman >> >> >> On Tue, Jan 17, 2017 at 4:47 PM, Marcus Müller <marcus.muel...@ettus.com> >> wrote: >> >>> Possibly just a temporary failure then; github or your network might >>> have had problems :) >>> >>> Cheers, >>> >>> Marcus >>> >>> On 17.01.2017 08:01, Usman Haider wrote: >>> >>> Hello Marcus, >>> >>> I am surprised the following command ran successfully. >>> >>> $ pybombs -vv recipes add gr-recipes git+https://github.com/gnuradi >>> o/gr-recipes.git >>> >>> -- >>> Usman >>> >>> On Mon, Jan 16, 2017 at 5:10 PM, Marcus Müller <marcus.muel...@ettus.com >>> > wrote: >>> >>>> Hm, interesting. Could you run your pybombs command with "-vv"? >>>> >>>> Best regards, >>>> >>>> Marcus >>>> On 01/16/2017 12:55 PM, Usman Haider wrote: >>>> >>>> Hello Nicolas, >>>> >>>> Thanks for your reply. I have sufficient disk space, more than 400 GB, >>>> so that is not an issue. I do not have any .gitconfig file in my home >>>> directory. I can download the recipes manually using the command you >>>> mentioned. >>>> >>>> git clone https://github.com/gnuradio/gr-recipes.git gr-recipes >>>> >>>> >>>> Please let me know if you need any further information. Thanks. >>>> >>>> -- >>>> Usman >>>> >>>> On Mon, Jan 16, 2017 at 3:21 PM, Nicolas Cuervo < >>>> nicolas.cue...@ettus.com> wrote: >>>> >>>>> Hello Usman, >>>>> >>>>> uhm, this is odd. So far I can see the command is correct. Although >>>>> error 128 means that git did not exit cleanly, and I just run it and it >>>>> ran >>>>> fine. Just some guesses for now: >>>>> >>>>> 1. Do you have enough disk space? the recipes do not require a lot of >>>>> disk space, though, but not enough space would lead to this. >>>>> 2. Do you have specific cloning configuration in your gitconfig? you >>>>> can check this by typing: >>>>> git config --global --edit >>>>> >>>>> or just by editing .gitconfig which is normally located at your home >>>>> directory. >>>>> 3. Can you clone anything else manually? you can try running: >>>>> >>>>> git clone https://github.com/gnuradio/gr-recipes.git gr-recipes >>>>> >>>>> just as a test that your git is working as expected. >>>>> >>>>> Please let us know if you find out something with this hypothesis I >>>>> mentioned. >>>>> >>>>> Cheers, >>>>> >>>>> - Nicolas >>>>> >>>>> >>>>> >>>>> >>>>> On Mon, Jan 16, 2017 at 9:46 AM, Usman Haider <usmanhaide...@gmail.com >>>>> > wrote: >>>>> >>>>>> I am following this guide to get started with RFNoC. I am using >>>>>> Ubuntu 14.04 and I ran following commands >>>>>> >>>>>> $ sudo apt-get install git >>>>>> $ sudo apt-get install python-setuptools python-dev build-essential >>>>>> $ sudo easy_install pip >>>>>> $ sudo pip install git+https://github.com/gnuradio/pybombs.git >>>>>> >>>>>> When I run following command >>>>>> >>>>>> $ pybombs -v recipes add gr-recipes >>>>>> git+https://github.com/gnuradio/gr-recipes.git >>>>>> >>>>>> I get output. >>>>>> ..... ..... ..... OMBS.PackageManager - DEBUG - Checking if package >>>>>> git is installed... PyBOMBS.Packager.apt - DEBUG - Package git has >>>>>> version >>>>>> 1.9.1 installed PyBOMBS.install_manager - DEBUG - Phase 2: Recursively >>>>>> installing source packages to prefix: PyBOMBS.Fetcher.git - DEBUG - >>>>>> Requirements met. PyBOMBS.Fetcher.git - DEBUG - Using url - >>>>>> https://github.com/gnuradio/gr-recipes.git PyBOMBS._process_thread() >>>>>> - DEBUG - Executing command `git clone https://github.com/gnuradio/gr >>>>>> -recipes.git gr-recipes' Cloning: [ >>>>>> PyBOMBS.recipes - ERROR - Could not fetch recipesCloning: [ >>>>>> PyBOMBS.recipes - ERROR - Could not fetch recipes: Process >>>>>> returnCloning: (100%) >>>>>> [=========================================================] >>>>>> PyBOMBS.monitor_process() - DEBUG - Thread signaled termination or >>>>>> returned >>>>>> PyBOMBS.monitor_process() - DEBUG - Return value: 128 PyBOMBS.recipes - >>>>>> ERROR - Could not fetch recipes: Process returned value: 128 >>>>>> What could be the issue? pybombs version is 2.3.1a. Thanks -- >>>>>> Usman >>>>>> _______________________________________________ Discuss-gnuradio >>>>>> mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/ >>>>>> listinfo/discuss-gnuradio >>>>> >>>>> _______________________________________________ >>>> Discuss-gnuradio mailing >>>> listDiscuss-gnuradio@gnu.orghttps://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>>> >>>> _______________________________________________ Discuss-gnuradio >>>> mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/ >>>> listinfo/discuss-gnuradio >>> >>> >> >> _______________________________________________ >> Discuss-gnuradio mailing list >> Discuss-gnuradio@gnu.org >> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> >> >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio