It's almost as if UHD installed, but GNU Radio didn't, although your output says otherwise.
What does $ ls ~/rfnoc/bin look like? Or $ pybombs inv ? On 01/18/2017 02:10 AM, Usman Haider wrote: > Hi Nicolas, > > Thanks for your time. I did that but the result is same. I can run > > |$|uhd_images_downloader > but > |$ gnuradio-companion > | > > fails. Let me know if any further information is needed. Thanks > > -- > Usman > On Wed, Jan 18, 2017 at 2:11 PM, Nicolas Cuervo > <nicolas.cue...@ettus.com <mailto:nicolas.cue...@ettus.com>> wrote: > > Hello Usman, > > Did you set up your PyBOMBS environment? If not, please do so. As > long as I understand your prefix is at ~/rfnoc. Being that the case, > please run: > > $ source ~/rfnoc/setup_env.sh > > After this your shell will have access to everything which has been > installed in that prefix, and you should be able to start > gnuradio-companion. Please have in mind that you have to set up this > environment in every new shell you start. > > Please let us know if this doesn't work so that we can look further > into it. > > Cheers, > > - Nicolas > > On Wed, Jan 18, 2017 at 9:58 AM, Usman Haider > <usmanhaide...@gmail.com <mailto:usmanhaide...@gmail.com>> wrote: > > Yes, could be the cause. After running the following commands > > $ cd ~/rfnoc > $ source ./setup_env.sh > $ uhd_images_downloader > > I was able to download the images. But when I tried to run > > |$ gnuradio-companion| > > It failed giving "The program 'gnuradio-companion' is currently > not installed. You can install it by typing: sudo apt-get > install gnuradio". Although, I have > > $ gnuradio-config-info --v > v3.7.10.1-202-g6225e5d4 > > $ gnuradio-config-info --prefix > /home/emb/rfnoc > > Otuput of PyBOMBS is as under. > > $ pybombs prefix init ~/rfnoc -R rfnoc -a rfnoc > PyBOMBS - INFO - PyBOMBS Version 2.3.1a > PyBOMBS.prefix - INFO - Creating directory `/home/emb/rfnoc' > Alias `rfnoc' already exists, overwrite Y/[N]? y > PyBOMBS.ConfigManager - INFO - Creating new config file > /home/emb/rfnoc/.pybombs/config.yml > PyBOMBS.prefix - INFO - Installing default packages for prefix... > PyBOMBS.prefix - INFO - > - gnuradio > - uhd > - gr-ettus > - uhd-fpga > PyBOMBS.install_manager - INFO - Phase 1: Creating install tree > and installing binary packages: > DEPRECATION: The default format will switch to columns in the > future. You can use --format=(legacy|columns) (or define a > format=(legacy|columns) in your pip.conf under the [list] > section) to disable this warning. > Install tree: > | > +- uhd-fpga > | > \- gr-ettus > | > +- uhd > | > \- gnuradio > | > +- uhd > | > \- apache-thrift > PyBOMBS.install_manager - INFO - Phase 2: Recursively installing > source packages to prefix: > PyBOMBS.install_manager - INFO - Installing package: apache-thrift > Cloning: (100%) > [=========================================================]] > Cloning: (100%) > [=========================================================] > Configuring: (100%) > [=========================================================] > Building: (100%) > [=========================================================] > Installing: (100%) > [=========================================================] > PyBOMBS.install_manager - INFO - Installation successful. > PyBOMBS.install_manager - INFO - Installing package: uhd > Cloning: (100%) > [=========================================================]] > Configuring: (100%) > [=========================================================] > Building: (100%) > [=========================================================] > Installing: (100%) > [=========================================================] > PyBOMBS.install_manager - INFO - Installation successful. > PyBOMBS.install_manager - INFO - Installing package: gnuradio > Cloning: (100%) > [=========================================================]] > Configuring: (100%) > [=========================================================] > Building: (100%) > [=========================================================] > Installing: (100%) > [=========================================================] > PyBOMBS.install_manager - INFO - Installation successful. > PyBOMBS.install_manager - INFO - Installing package: gr-ettus > Cloning: (100%) > [=========================================================] > Configuring: (100%) > [=========================================================] > Building: (100%) > [=========================================================] > Installing: (100%) > [=========================================================] > PyBOMBS.install_manager - INFO - Installation successful. > PyBOMBS.install_manager - INFO - Installing package: uhd-fpga > Cloning: (100%) > [=========================================================]] > Configuring: (100%) > [=========================================================] > Building: (100%) > [=========================================================] > Installing: (100%) > [=========================================================] > PyBOMBS.install_manager - INFO - Installation successful. > > > Any pointers? :) > > -- > Usman > > > On Tue, Jan 17, 2017 at 4:47 PM, Marcus Müller > <marcus.muel...@ettus.com <mailto:marcus.muel...@ettus.com>> wrote: > > Possibly just a temporary failure then; github or your > network might have had problems :) > > Cheers, > > Marcus > > > On 17.01.2017 08:01, Usman Haider wrote: >> Hello Marcus, >> >> I am surprised the following command ran successfully. >> >> $ pybombs -vv recipes add gr-recipes >> git+https://github.com/gnuradio/gr-recipes.git >> <https://github.com/gnuradio/gr-recipes.git> >> >> -- >> Usman >> >> On Mon, Jan 16, 2017 at 5:10 PM, Marcus Müller >> <marcus.muel...@ettus.com >> <mailto:marcus.muel...@ettus.com>> wrote: >> >> Hm, interesting. Could you run your pybombs command >> with "-vv"? >> >> Best regards, >> >> Marcus >> >> On 01/16/2017 12:55 PM, Usman Haider wrote: >>> Hello Nicolas, >>> >>> Thanks for your reply. I have sufficient disk space, >>> more than 400 GB, so that is not an issue. I do not >>> have any .gitconfig file in my home directory. I can >>> download the recipes manually using the command you >>> mentioned. >>> >>> git clone https://github.com/gnuradio/gr-recipes.git >>> <https://github.com/gnuradio/gr-recipes.git> gr-recipes >>> >>> >>> Please let me know if you need any further >>> information. Thanks. >>> >>> -- >>> Usman >>> >>> On Mon, Jan 16, 2017 at 3:21 PM, Nicolas Cuervo >>> <nicolas.cue...@ettus.com >>> <mailto:nicolas.cue...@ettus.com>> wrote: >>> >>> Hello Usman, >>> >>> uhm, this is odd. So far I can see the command is >>> correct. Although error 128 means that git did >>> not exit cleanly, and I just run it and it ran >>> fine. Just some guesses for now: >>> >>> 1. Do you have enough disk space? the recipes do >>> not require a lot of disk space, though, but not >>> enough space would lead to this. >>> 2. Do you have specific cloning configuration in >>> your gitconfig? you can check this by typing: >>> git config --global --edit >>> >>> or just by editing .gitconfig which is normally >>> located at your home directory. >>> 3. Can you clone anything else manually? you can >>> try running: >>> >>> git clone >>> https://github.com/gnuradio/gr-recipes.git >>> <https://github.com/gnuradio/gr-recipes.git> >>> gr-recipes >>> >>> just as a test that your git is working as >>> expected. >>> >>> Please let us know if you find out something with >>> this hypothesis I mentioned. >>> >>> Cheers, >>> >>> - Nicolas >>> >>> >>> >>> >>> On Mon, Jan 16, 2017 at 9:46 AM, Usman Haider >>> <usmanhaide...@gmail.com >>> <mailto:usmanhaide...@gmail.com>> wrote: >>> >>> I am following this guide to get started with >>> RFNoC. I am using Ubuntu 14.04 and I ran >>> following commands >>> >>> $ sudo apt-get install git >>> $ sudo apt-get install python-setuptools python-dev >>> build-essential >>> $ sudo easy_install pip >>> $ sudo pip install >>> git+https://github.com/gnuradio/pybombs.git >>> <https://github.com/gnuradio/pybombs.git> >>> >>> When I run following command >>> >>> $ pybombs -v recipes add gr-recipes >>> git+https://github.com/gnuradio/gr-recipes.git >>> <https://github.com/gnuradio/gr-recipes.git> >>> >>> I get output. >>> ..... ..... ..... OMBS.PackageManager - DEBUG >>> - Checking if package git is installed... >>> PyBOMBS.Packager.apt - DEBUG - Package git >>> has version 1.9.1 installed >>> PyBOMBS.install_manager - DEBUG - Phase 2: >>> Recursively installing source packages to >>> prefix: PyBOMBS.Fetcher.git - DEBUG - >>> Requirements met. PyBOMBS.Fetcher.git - DEBUG >>> - Using url - >>> https://github.com/gnuradio/gr-recipes.git >>> <https://github.com/gnuradio/gr-recipes.git> >>> PyBOMBS._process_thread() - DEBUG - Executing >>> command `git clone >>> https://github.com/gnuradio/gr-recipes.git >>> <https://github.com/gnuradio/gr-recipes.git> >>> gr-recipes' Cloning: [ >>> PyBOMBS.recipes - ERROR - Could not fetch >>> recipesCloning: [ PyBOMBS.recipes - ERROR >>> - Could not fetch recipes: Process >>> returnCloning: (100%) >>> >>> [=========================================================] >>> PyBOMBS.monitor_process() - DEBUG - Thread >>> signaled termination or returned >>> PyBOMBS.monitor_process() - DEBUG - Return >>> value: 128 PyBOMBS.recipes - ERROR - Could >>> not fetch recipes: Process returned value: 128 >>> What could be the issue? pybombs version is >>> 2.3.1a. Thanks -- >>> Usman >>> _______________________________________________ >>> Discuss-gnuradio mailing list >>> Discuss-gnuradio@gnu.org >>> <mailto:Discuss-gnuradio@gnu.org> >>> >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> >>> <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >>> >>> >>> _______________________________________________ >>> Discuss-gnuradio mailing list >>> Discuss-gnuradio@gnu.org >>> <mailto:Discuss-gnuradio@gnu.org> >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >> _______________________________________________ >> Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org >> <mailto:Discuss-gnuradio@gnu.org> >> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >> >> > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> > > > > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio