JRatron wrote: > I believe that because at this stage of the project, people are expected > to supply their own wandboard and case, the kit will basically be a CSP1 > DAC board, custom end plate(s) for the case and any other little bits > that are needed to fit it together nicely. > > So the end plates will likely need making from scratch, although I will > just double check that they're not available really cheap as spares from > Hammond, just in case. > The rear end plates will need the holes for the various plugs making, > plus printing. The screw holes in the standard end plates are > countersunk to take countersunk screws. Because everything else will be > a straight cut, it may possibly be cheaper to remove an extra > manufacturing process and use pan-head or socket cap screws instead. > > John, do you have an idea of what you expect batch sizes to be? I'll > work out pricing for 100, 500 and 1,000 as a starting point
We need to decide whether we will be using those black plastic front and back surrounds, if we don't use them I have to make the board 1/8" shorter. I personally rather like them. and they cover up the edge of the panel, which may or may not be an issue depending on the panel. CSP1 is the beta run and we were planning on 25 units. CSP2 is going to be the general distribution version which was sort of being planned for 400 units. Thanks for working on this. John S. ------------------------------------------------------------------------ JohnSwenson's Profile: http://forums.slimdevices.com/member.php?userid=5974 View this thread: http://forums.slimdevices.com/showthread.php?t=97881 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
