mattpitts74 wrote: > I think I may have figured out the problem, as others using the NAD 3020 > digital amp have also experienced this problem too, It appears that > when the NAD goes into standby, it powers off its USB port and thus > electrically disconnects from the Pi USB port, as if the cable were > pulled, so when I switch the NAD back on and try to play no sound, and > the only way to get it working is to restart with the amp powered on and > then it all works again. Apparently this is something to do with a > hot-swappable issue, does that make any sense to anyone?
Try this then, if NAD regard the USB input as digital, it may work. > AUTO SENSE > Auto sense feature enables the D 3020 to wake up from standby mode and > starts operation by selecting OPTICAL 1 source or the last digital > source > before going to standby mode. > CONDITIONS FOR AUTO SENSE > For Auto Sense to work, Auto Standby must be set to ON with D 3020 > going first to standby mode. > If IR Learning with TV remote control is successfully completed and > with > D 3020 going to standby mode, auto sense is activated upon detection > of active digital input only from OPTICAL 1 input. > − With this condition, D 3020 wakes up and automatically switches > to > OPT1. > If no IR Learning is conducted, auto sense is activated upon detection > of active input from the last source (limited only to the digital > sources) > before the D 3020 goes to standby mode. > − With this condition, D 3020 wakes up and automatically switches > to > the last selected digital source prior to the D 3020 going to standby > mode. ------------------------------------------------------------------------ Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=106590
_______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
