miguelk;317908 Wrote: 
> So...since I last posted, I purchased a Linksys WRT54G loaded with
> Tomato firmware.  Got the signal strength up to nearly 70%, but that's
> with turning the power on the router up to 250 (goes up to 251). 
> Controller now works better, and system generally runs now without
> skipping. BUT...every hour or two I get the message: "Connection Reset
> by Host".  And i have to reboot both the controller and the SB3 to get
> it to work properly again.  Anyone have any idea what that's about? 
> Besides using the best channel, are there any other settings in Tomato
> which might help improve my reception?
> 
> Also, is there any danger to running my Linksys with the 250 setting? 
> There's no fan on it...will it burn out?
> 
> Finally, in an effort to boost my signal even further, I've ordered
> another Linksys WRT54G loaded with DD-WRT firmware, which gives the
> option of using the router as a repeater.  Has anyone here done that? 
> 
> Thanks.

>From memory I wouldn't run the Router at that power level, in fact I
think some of the higher levels actually reduce the output?  You my do
some damage in the load term.  Search in google and you will find
answers.  Instead of cranking the power up (which also cranks up the
noise btw), try placing the router higher (or at least the antenna) /
in a different position.

Connection reset by host means that one end of the tcp conn, (generally
the opposite end to where the error was received), has deliberately
killed the connection, but in a bad way.  Yes as in the wireless
dropped out or maybe something else on the host has happened?

I use my WRT54G as a bridge.  Not sure how to get it to be a repeater. 
BTW repeating wireless halves the throughput

Steve


-- 
mctubster
------------------------------------------------------------------------
mctubster's Profile: http://forums.slimdevices.com/member.php?userid=353
View this thread: http://forums.slimdevices.com/showthread.php?t=48985

_______________________________________________
discuss mailing list
discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss

Reply via email to