On Thu, Nov 18, 2010 at 6:00 AM, Wolfgang Spraul <[email protected]>wrote:
> David, > thanks for writing! > > > I'd noticed that the sensor page on Xué indicated that the Aptina > > MT9M033C12STC was currently being sampled (tested?), and was wondering > > whether any of the other sensors had been tested > Hi, A comparison of some sensors: http://en.qi-hardware.com/wiki/Xue/sensors We gave priority to the sensitivity of the sensor (up to *120db!*). The sensor in action: http://www.altera.com/education/webcasts/videos/videos-image-processing-fpgas.html Regards, Andrés Calderón Cel: +57 (300) 275 3666 Email: [email protected] Gtalk: [email protected] Web: www.emqbit.com > > We have placed a firm order for 30 of those sensors, and expect to > get them in mid-December. Expensive ICs, we paid 18.90 USD / sensor! > If we get them, I'm sure we will build the first cameras with those > sensors, and will try to unlock the full potential of these ICs with > free software for quite some time, maybe a year or more? > > > especially those with higher resolution. > > What is good about higher resolution? > > > OV14810, for example, looks interesting. > > What parameters do you look at in a sensor? Can you tell us a bit > more about your use case, what you have in mind with Xué? > > > On the point of adding a second sensor, will a only a single sensor type > > be supported via on-board circuitry? (I suppose the supplied Ethernet > > could be used for attaching a variety of second sensor modules; e.g., > > Elphel.) > > How do you want to attach another sensor via Ethernet? Sure with > Ethernet you could connect to other IP cameras, including Elphel, but > that would be at a very different level from getting sensor data into > an FPGA. > > Wolfgang > > _______________________________________________ > Qi Hardware Discussion List > Mail to list (members only): [email protected] > Subscribe or Unsubscribe: > http://lists.en.qi-hardware.com/mailman/listinfo/discussion >
_______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
