Hi Guys,
My issue relates to here: https://forums.slimdevices.com/showthread.php?109769-PiCoreplayer-no-sound-on-button-press-(RPI-Zero-W) Shortly explained: I'm using the Daemon with TTP223 touch-buttons. Nothings working they way it should be. my frustration is rising to new heights... I have received all the parts I needed to finally assemble the player and system. Also I had printed all the parts in ABS and smoothed them. So now two things have occured in-between: 1. I assembled it and when all buttons where soldered, the reaction ot any button-press is totally paradox. If I press play, it is quite possible that it will skip the track, make it a bit louder and stop the playing. Also on pressing other buttons, basically any reaction and especially a combination of the is happening. Unfortunately I have used VCC (5V) for the buttons, which will have an output of about 4,XXV when pressed. So I guess I barbecued the GPIO and bought a new RpiZeroW. 2. I have soldered the buttons to the 3.3V VCC befor connecting the new PI. But - the issue persists. I tried the configuration string with signal on falling edge / rising edge / no separate option (which is the standard). So in fact the buttons are not usable at all, which is terribly annoying. Can anyone help me / share some ideas? Regards, Matthias ------------------------------------------------------------------------ maeffjus's Profile: http://forums.slimdevices.com/member.php?userid=68549 View this thread: http://forums.slimdevices.com/showthread.php?t=107001 _______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
