Hello, I think you own a RaspberryPi 1st version( or a derivative.. ).. The 'bcm2835' could be found in: . Raspberry Pi Model A, . Raspberry Pi Model B, B+ . The Compute Module . Raspberry Pi Zero
At least the frequency Scheduler reports a fixed value of 700Mhz, Your BogoMIPS report is also inline with 'bcm2835'( Single core, 32bit ARMv11@700Mhz ).. I think you should try with: https://mirror.leaseweb.com/devuan/devuan_ascii/embedded/devuan_ascii_2.0.0_armel_raspi1.img.xz If you had already tried, The best Option, would be to try to fix sdcard frequency to start with a fix *Default* speed and then try to Boot-Up.. This value bellow is the default( its what I have in my Board since the beguining... I am an Early Owner :) ) In /boot/config.txt # First try with initial emmc clock of 50Mhz... ( should be the default .. but still, try to force it..you could have a diferent sdcard.. ) init_emmc_clock (50000000) After that, if can't boot, please give us some bootup data like previously :) Good Luck, Regards -- s@po <[email protected]> _______________________________________________ Dng mailing list [email protected] https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
