On 7/17/19 3:50 PM, Andreas Messer wrote:
On Tue, Jul 16, 2019 at 08:02:43PM -0500, hal wrote:
Hello,
Thank you. Here is the boot output from
devuan_ascii_2.0.0_armel_raspi1.img.xz and setting emmc clock to 50Mhz in
config.txt
The same sdcard will boot my Raspi A+ fine so maybe it's hardware?
https://pastebin.com/gtcVxqRd
I can confirm the image booting successfully on my RPI 3 Model B+
with 2A USB Powersupply. (USB Keyboard/Mice attached through Hub not
working, but I see a login screen)
So I think your hardware seems to be broken somehow.
cheers,
Andreas
Hi,
I think it was the power adapter. I have a new 2.5A and got the
Pi to boot. It's weird because I thought I used a 2A adapter to
boot these before. Maybe the adapter is bad.
Do you use a serial port on your PI 3? I purchased one last week
on Ebay but have no serial output on the UART0_TXD + UART0_RXD pins.
Some searching says to add "core_freq=250" or "enable_uart=1" but
so far still nothing. Any suggestions are appreciated.
Thank you
_______________________________________________
Dng mailing list
[email protected]
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
