On 7/11/19 3:02 PM, s@po wrote:
If you had already tried,
The best Option, would be to try to fix sdcard frequency to start with a fix
*Default* speed and then try to Boot-Up..
This value bellow is the default( its what I have in my Board since the
beguining... I am an Early Owner :) )
In /boot/config.txt
# First try with initial emmc clock of 50Mhz... ( should be the default .. but
still, try to force it..you could have a diferent sdcard.. )
init_emmc_clock (50000000)
After that, if can't boot, please give us some bootup data like previously :)
Good Luck,
Regards
Hello,
Thank you. Here is the boot output from
devuan_ascii_2.0.0_armel_raspi1.img.xz and setting emmc clock to 50Mhz
in config.txt
The same sdcard will boot my Raspi A+ fine so maybe it's hardware?
https://pastebin.com/gtcVxqRd
_______________________________________________
Dng mailing list
[email protected]
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
