Well intrepid 95 still in the shop. Almost a month now! Wiring harness was shorting out and probably sending out false signals.....shop changed out camsensor and IVAV motor before looking at the harness... Shop claimed that PCM is sensitive, so they put in another too. They took notice that the vacuum was low, and replaced the EGR valve. Bill is getting higher! Blinking cruise light still comes on, and when it warms to closed loop, car still chokes itself off. Mechanic says probably another short somewhere, since the battery is now dead.
I mentioned Darkpaw comment about the camshaft sensor, but mechanic said he doesnt get anymore bad sensor codes. (This is the Chrysler dealer now) Thoughts? Sell? Steve -- In [email protected], "Darkpaw Timberwuf" <[EMAIL PROTECTED]> wrote: > CRUISE light flashing is problematic crankshaft position sensor. > > Cheers. > > -DP > > -----Original Message----- > From: [email protected] > [mailto:[EMAIL PROTECTED] On Behalf Of smptapp > Sent: Saturday, June 18, 2005 2:12 AM > To: [email protected] > Subject: [dodge_intrepid] Re: Does 95 Intrepid need another computer? > Now lights blinking > > [...] > > car starts right up > but once it warms up it starts alternate blinking the cruise > light and check engine light > then the engine chokes up until it dies > after a cool down period > it starts right up and can be driven about 2 miles before it warms > and chokes up again....the blinking light thing is leery > the only code i believe is the IVAC signal code now > > thanks guys! is this the computer? > > > [...] Web: <http://groups.yahoo.com/group/dodge_intrepid> Subscribe: <mailto://[EMAIL PROTECTED]> Unsubscribe: <mailto://[EMAIL PROTECTED]> Moderator: <mailto://[EMAIL PROTECTED]> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dodge_intrepid/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
