Thank you for the info...I will contact her. Kurt On Mon, Jan 28, 2019 at 3:38 AM Nigel Baker <[email protected]> wrote:
> Hi Kristen. > > Hope Tom is behaving himself. > > The crankcase is a mandatory replacement item at TBO for the L2000 and the > L1700 but not the L2400. > > I have brought many cases into OZ for that reason. > > The 2 halves of the case are assembled and bolted tight then machined so > that is to say match machined. Each case has its halves numbered in > production to keep track of the pairs when separated. Thus the halves are > not available individually. > > They should contact Gerlinde Limbach at the factory > [email protected] for a quote. They must supply the serial > number of the engine to identify the case revision. > > I think China is doing the research work on upgrades to the 2 strokes ( I > don’t deal in them) but certainly the certified 4 strokes are still > produced in Germany under EASA certification. > > Hope that is of help. > > Cheers. > > Nige. > > > > > > *From:* [email protected] <[email protected]> *On > Behalf Of *Kristin Nowell > *Sent:* Monday, January 28, 2019 1:56 AM > *To:* [email protected] > *Subject:* Re: [DOG mailing list] Limbach Service > > > > Nigel, > > I was just queried regarding the availability of a case half for a > l2000aa...grob owner was told such was not available from Germany...is this > right? What is the current situation with limbach and China ?? > > > > > > On Wed, Jan 23, 2019, 03:31 Nigel Baker <[email protected] wrote: > > Hi All. > > That time has come and I am retired. > > I have retired from all GFA airworthiness responsibility’s and will now > focus on our own fleet. > > The insurance for Limbach sales has doubled and I have no chance paying it > ongoing from the meagre profit made on trade. > > So I am closing up that shop as of the end of June just before the renewal > is due. > > I presently have good stocks of spark plugs and exhaust pipe gasket ring > assemblies along with other assorted spares including 2 new L2000 cylinder > heads with the latest head castings. > > Let me know if there is anything you may need. > > Cheers. > > Nige. > > > > > >
