Check that the small brass bush in the front underside of the tailplane has not come loose in the fibreglass. I would not fly it until you work out the problem regards Rob
Rob Thompson 0429 493 828 On Sun, Jun 6, 2021 at 6:51 AM Ian Williams <[email protected]> wrote: > Make sure the lock nut on the front rod end attach is tight and locked > > Sent from my iPhone > > On 6/06/2021, at 2:23 AM, Jarek Steliga <[email protected]> wrote: > > <Horizontal Stabilizer Slack.jpg> > Horizontal Stabilizer Slack vid 1.mp4 > <https://drive.google.com/file/d/1CFNLpdRX6LjFZibzpyI0SvOMkW_ic2oE/view?usp=drive_web> > Horizontal Stabilizer Slack vid.mp4 > <https://drive.google.com/file/d/1cpyc_EnVllXmkqnHitOG5XarYsKhEq1c/view?usp=drive_web> > > > Hello, > > > We noticed a slight slack as demonstrated in the attached videos. In the > photo you can see pieces of tape attached across the gap which visibly > wrinkles when the stabilizer is pushed back and forth. The estimated travel > is ca 2 mm. > > > Is this an immediate cause for concern? > > Best regards > Jarek Steliga > > >
