Ian, Rob, Thank you
Regards Jarek On Sun, 6 Jun 2021 at 03:18, Rob Thompson <[email protected]> wrote: > Check that the small brass bush in the front underside of the tailplane > has not come loose in the fibreglass. > I would not fly it until you work out the problem > regards > Rob > > Rob Thompson > 0429 493 828 > > > > On Sun, Jun 6, 2021 at 6:51 AM Ian Williams <[email protected]> wrote: > >> Make sure the lock nut on the front rod end attach is tight and locked >> >> Sent from my iPhone >> >> On 6/06/2021, at 2:23 AM, Jarek Steliga <[email protected]> wrote: >> >> <Horizontal Stabilizer Slack.jpg> >> Horizontal Stabilizer Slack vid 1.mp4 >> <https://drive.google.com/file/d/1CFNLpdRX6LjFZibzpyI0SvOMkW_ic2oE/view?usp=drive_web> >> Horizontal Stabilizer Slack vid.mp4 >> <https://drive.google.com/file/d/1cpyc_EnVllXmkqnHitOG5XarYsKhEq1c/view?usp=drive_web> >> >> >> Hello, >> >> >> We noticed a slight slack as demonstrated in the attached videos. In the >> photo you can see pieces of tape attached across the gap which visibly >> wrinkles when the stabilizer is pushed back and forth. The estimated travel >> is ca 2 mm. >> >> >> Is this an immediate cause for concern? >> >> Best regards >> Jarek Steliga >> >> >>
