-------- Forwarded Message --------
Subject: Re: [DOG mailing list] Generator Belt Specification
Date: Tue, 23 Nov 2021 22:18:44 +0800
From: The Ric <[email protected]>
To: Martyn <[email protected]>
just as a thought. at a stretch/last resort type situation the water
pump belt from a 2.6 litre petrol mitsubishi magna (Australia should be
the same as NZ? 4G54 astron engine i think)(mid 1990's - TN, TM, TP TR
and yes even the TS )is a 11A0545. it will ride higher in the pulley and
wont have as good grip on the side walls (as it is a different profile)
but it should get you through untill you can get a proper one.
unless you have a beefy stereo system or pie warmer or heated towel rack
or kettle or hair dryer or toasted sandwhich maker or snow melting
landing lights or electric wool press, or welder or wood chipper or
fondue fountain or jack hammer or rock tumbler or rechargeable electric
tooth brush or steam iron or vacuum cleaner or MRI machine plugged in
and its using all of the 40amps then it may slip a bit.
On 23/11/21 11:34 am, Martyn wrote:
Dear DOG colleagues
I urgently need to spec for the generator belt on the Limbach engine
in my H36 Dimona.
It's frayed and I need to replace it, and I have a flying commitment
in 1 day. So I need to try and find one, and then go about installing it.
A very prompt reply would be appreciated . . . .
Warmest regards
Martyn
ZK-GPH New Zealand
