I don't have a specific MPN, but JST has a number or connectors that would be appropriate. I've seen lots of these in high volume production. I think Hirose is another manufacturer you might look at for these connectors. Digikey or Mouser usually have one or the other as stocked options.
Rich -----Original Message----- From: "David Madden" <[email protected]> Sent: 8/28/2014 5:50 PM To: "A discussion list for dorkbot-pdx (portland, or)" <[email protected]> Subject: [dorkbotpdx-blabber] Wire-to-Board Connectors Does anybody have favorite wire-to-board connectors? Cheap, easy to use, etc? I found these: http://www.molex.com/molex/products/family?key=litetrap&channel=products&chanName=family&pageTitle=Introduction&parentKey=wire_to_board_connectors which look like what I need, but they only come in 1- and 2-position styles. I have to connect about 15-20 wires from an old home-security system. (The old system used screw terminals, but those would take up probably twice as much PCB as the whole rest of the circuit!) Thanks, -- Mersenne Law LLP · www.mersenne.com · +1-503-679-1671 - Small Business, Startup and Intellectual Property Law - 9600 S.W. Oak Street · Suite 500 · Tigard, Oregon 97223
_______________________________________________ dorkbotpdx-blabber mailing list [email protected] http://music.columbia.edu/mailman/listinfo/dorkbotpdx-blabber
