Did you ohm out the diodes in the AC4? If not, try that. If those are ok, try jumpering the pins in the connector that turn the power supply on.(don't remember which ones right off hand, but you can see in the manual) and the plug the AC4 in by itself and see if the fuse still blows .... if so , will at least let you know PS is the problem, not the rig.
John At 02:20 PM 2/1/04 -0500, Fred Kimble wrote: > > >Hi gang: >I just bought a TR-4 and AC-4 Power Supply and it was almost DOA. It >blew a fuse in the p/s and I put another in and same. I looked in the >p/s for all the obvious stuff but nothing. Any ideas? I really am >depressed on this I can't afford to spend about $200.00 for >repair..Thanks >Fred AI5I > >---------------------------------------------------------------------- >Submissions: [EMAIL PROTECTED] >Subscribe: [EMAIL PROTECTED] - subscribe drakelist in body >Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body >Hopelessly Lost: [EMAIL PROTECTED] - help in body of message >Brought to you courtesy of TLCHost.net http://www.tlchost.net/ >---------------------------------------------------------------------- > > >--- > >Checked by AVG anti-virus system (http://www.grisoft.com). >Version: 6.0.573 / Virus Database: 363 - Release Date: 1/28/04 >
--- Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.573 / Virus Database: 363 - Release Date: 1/28/04
