thanks Lanny and all.
Got the manual, "slip out" was difficult to say the least. Had to use a lot of WD-40 and force. Had small bits of ceramic rattling around inside and the unit is dead. That is, I plug in the cables and no RX noises. On TX it shows infinite SWR, even on Alternate or Direct, so something is either open or shorted to ground. I start on the switches. And, of course, careful conversation with the seller.
73, Peter W2CDO
----------------------------
From: Lanny Rathert
Sent: Fri 3/3/2006 6:20 AM
To: Alterman, Peter (NIH/CIT) [E]; [email protected]
Subject: RE: [drakelist] more stupid questions about MN-2000
Peter,
Remove screws on bottom and cabinet will slip out.Check WB4HFN 's website for copy of manual.
73......Lanny N0JZ
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alterman, Peter (NIH/CIT) [E]
Sent: Thursday, March 02, 2006 8:36 PM
To: [email protected]
Subject: [drakelist] more stupid questions about MN-2000Just received one bought off eBay. In rough shape. No manual, either.So here's the stupid question: how do I get the cabinet off so I can get to the innards and see what's rattling around inside?Another stupid question: is there a manual available on the web for download?Will need rubber feet, paint and a front panel cleaning. Maybe more after I check the inside and fire it up.Thanks in advance.73, Peter W2CDO
