Dino Papas <[EMAIL PROTECTED]> made an utterance to the drakelist gang
----------------------------------------------------------------------
Dale -- page 2-2 in the manual:
2-10. PTO Lamp.
This jack provides a ground return for the pilot lamp behind the PTO
dial. The R-4C is shipped with a shorted phono plug in this jack so
that the lamp will light. When the R-4C is used with the T-4XC
transmitter, remove the shorted phono plug and connect a cable
between the PTO lamp jacks of the two units. The lamp will then
light only with the T-4XC TRANSCEIVE switch is in the RCVR, SEPARATE,
or SOPT positions. In the XMTR position, the lamp will not light to
indicate that the R-4C PTO is disabled.
Same goes for the MUTE jack....if used alone you need a shorted phono
jack there as well to operate; connect to T-4XC as required.
Dino KL0S/4
----------------------------------------------------------------------
Submissions: [EMAIL PROTECTED]
Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost: [EMAIL PROTECTED] - help in body of message
Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net
----------------------------------------------------------------------
