You need to use a shorted phono plug in the PTO jack unless you are using the receiver with a transceiver. Thern connect a cable between the two PTO jacks..
_____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, May 21, 2007 8:43 PM To: [EMAIL PROTECTED] Subject: [drakelist] need help with c-line Maybe a stupid question. have a new ....too me.... c line have the receiver on the bench. added some filters and changed the two lamps. the meter lamp works fine, the pto lamp won't light, till I supply a hard ground to the lamp... then lights ok. traced the ground back to the pto/lamp jack...rca on the back panel. I read and reread the manual,can't find anything. does the jack need a shorting plug in order for the pto lamp to light when the r4c is used alone... or is c-169 open? hard to tell from the lousy schematic reprint I have. ....like I say the lamp works fine if I supply a good chassis ground to the lamp. thought I would ask before I made my self nuts. thanks for any help on this. dale wt4t _____ AOL now offers free email to everyone. Find out more about what's free from AOL at <http://www.aol.com?ncid=AOLAOF00020000000437> AOL.com.
