Ken Bessler <[EMAIL PROTECTED]> made an utterance to the drakelist gang
----------------------------------------------------------------------

> Date: Thu, 13 Dec 2007 16:26:44 -0500
> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Subject: Re: [drakelist] TR4 RF power on 10m
>
>
> Garey Barrell  made an utterance to the drakelist gang
> ----------------------------------------------------------------------
> Ken -
>
> Well, it depends...... :-)
>
> A properly aligned TR-4 with good finals should put out 150W or a little
> more on 10M.
>
> Are you tuning into a "good" dummy load?

Yes.

>
> What is the plate current reading on the meter when you have 65W
> output? Does the meter read about the same plate current as on the
> other bands, or is it considerably less?

320ma yeilds 70 watts or so on 10 meters and 20 meters - the differance
is that I can get more current and power on the lower bands. on 10m, 
320 ma is all she'll produce. Turning the XMTR GAIN further on 10m has
no effect.

> Is the neutralization adjusted correctly? Does the plate current dip
> coincide with maximum output? Or does maximum output power require that
> you adjust the PLATE control "out" of the dip?

It almost peaks with the  dip - it's real close but if I turn the PLATE control
just a hair CCW past the dip point I get another 10%.

> Is the transmitter properly aligned?
>
> The final tubes may be getting "soft". Weak final tubes exhibit low
> output power first on the highest bands.
>
> 73, Garey - K4OAH
> Glen Allen, VA


_________________________________________________________________
Don't get caught with egg on your face. Play Chicktionary!
http://club.live.com/chicktionary.aspx?icid=chick_wlhmtextlink1_dec
----------------------------------------------------------------------
Submissions:        [EMAIL PROTECTED]
Unsubscribe:        [EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost:    [EMAIL PROTECTED] - help in body of message
Zerobeat Web Page:  www.zerobeat.net - sponsored by www.tlchost.net
----------------------------------------------------------------------

Reply via email to