"Jim F." <[EMAIL PROTECTED]> made an utterance to the drakelist gang ---------------------------------------------------------------------- Thanks Dennis,
Good information that I will use. Jim --- Dennis Monticelli <[EMAIL PROTECTED]> wrote: > > "Dennis Monticelli" <[EMAIL PROTECTED]> > made an utterance to the drakelist gang > ---------------------------------------------------------------------- > Actually, ProGold is formulated for preserving > contacts coated for > precious metal (like gold, platinum and silver). > But I suppose no > harm in keeping a coating on the pins and > receptacles; it should keep > the air off the surface. Go for it. > > Dennis AE6C > > On Jan 6, 2008 6:09 PM, Jim F. <[EMAIL PROTECTED]> > wrote: > > > > "Jim F." <[EMAIL PROTECTED]> made an utterance to > the drakelist gang > > > ---------------------------------------------------------------------- > > Excellent ! > > > > Nothing is simple is it ? > > > > The $15 RS miniature Deoxit can came with an > equally > > diminutive can of Deoxit "Gold" which is supposed > to > > coat electrical contacts. I better coat the Jones > > pins and not plan to take the radio to the beach > :-) > > > > Actually, I don't intend to use the thing much > because > > I'm a die hard CW QRPer. I'm retired and totally > enjoy > > building, trouble shooting, and fixing radios, > even > > more than s-x. > > > > Thanks guys.. > > > > Jim / W1FMR NH > > > > > > > > > > --- Dennis Monticelli > <[EMAIL PROTECTED]> > > wrote: > > > > > > > > "Dennis Monticelli" > <[EMAIL PROTECTED]> > > > > > made an utterance to the drakelist gang > > > > > > ---------------------------------------------------------------------- > > > You're probably right, Garey. The thin Cd > plating > > > could well be gone > > > now. Ammonium nitrate can attack Cd. I am > > > certainly no chemist > > > either and I don't know what was in that brass > > > polish, but according > > > to a material book I have, intentional stripping > of > > > Cd from mild steel > > > or Cu involves KCIO3 with Hydrochloric acid, > both at > > > about 5%. > > > > > > It is also possible for a cadmium-based > corrosive > > > layer to develop > > > slowly, build up thickness and in time become > self > > > passivated, leaving > > > a layer of pure Cd underneath. It depends upon > the > > > nature of the > > > contaminants in the air and the humidity what > type > > > of film forms. > > > > > > To stay on the safe side, I would just keep > those > > > pins well coated > > > with an anti-oxident. > > > > > > Dennis AE6C > > > > > > > > > On Jan 6, 2008 3:01 PM, Garey Barrell > > > <[EMAIL PROTECTED]> wrote: > > > > > > > > Garey Barrell <[EMAIL PROTECTED]> made an > > > utterance to the drakelist gang > > > > > > > > > > ---------------------------------------------------------------------- > > > > Jim - > > > > > > > > The Jones connector pins are cadmium plated > steel. > > > > > > > > I'm certainly no chemist, but I wonder if the > > > ammonia, (present in most > > > > brass polishes,) is what got the cadmium. It > > > sounds like you may be > > > > down to bare steel, which might be a problem > in > > > future. > > > > > > > > Old steel chassis used to be cadmium plated, > and > > > would grow the same > > > > crud. (Chemical term there.....) I think > > > cadmium plating is now among > > > > the millions of things that have been around > > > hundreds of years which > > > > have now been declared harmful to our health! > :-) > > > > > > > > 73, Garey - K4OAH > > > > Glen Allen, VA > > > > > > > > > > > > > > > > > > > > > > > > Jim F. wrote: > > > > > "Jim F." <[EMAIL PROTECTED]> made an > utterance > > > to the drakelist gang > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > Results of my experiments: > > > > > > > > > > Tried 3 things to clean the battleship gray, > > > tough as > > > > > nails, oxidation from Jones plug pins that > the > > > 12VAC > > > > > filament voltage could not even penetrate. > > > > > > > > > > 1. Craig Deoxit (RS - very expensive) and > didn't > > > work > > > > > > > > > > 2. Contact spray (RS) cleaner didn't work > > > > > > > > > > 3. MWW Brass Chrome & metal polish worked. > > > > > > > > > > Got it from the supermarket. It is a gray > paste > > > > > that turns oxidation black when left on for > a > > > while > > > > > and removes it in chunks with a Q-tip. > > > > > > > > > > The pins were so bad that I had to do it a > > > > > couple of times then clean the residue with > RS > > > > > spray contact cleaner and Q-tips. > > > > > > > > > > It's much cheaper than buying and installing > > > > > new 15 pin Jones connectors, if that > mounting > > > > > type are even available. > > > > > > > > > > Nice to see shiny metal coming through but > don't > > > > > know what to do about the plug receptacle. > > > > > > > > > > Does anyone have a cable mount 15 pin Jones > > > > > receptacle for sale ? > > > > > > > > > > Without the shell is OK as I can use the old > > > one. > > > > > > > > > > Regards, > > > > > > > > > > Jim / W1FMR > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > Submissions: [EMAIL PROTECTED] > > > > Unsubscribe: [EMAIL PROTECTED] - > > > unsubscribe drakelist in body > > > > Hopelessly Lost: [EMAIL PROTECTED] - > help > === message truncated === ---------------------------------------------------------------------- Submissions: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net ----------------------------------------------------------------------
