Peter et al,
I'm not sure that information is correct. The 3-500Z has a 5.0 volt filament, not 12.0 v; it is supplied by the filament transformer in the RF deck, not via the L4 power supply. Also, the secondary voltage will see variations based upon the input voltage, e.g. 210 v versus 220 v versus 230 v etc. so the meter reading on the secondary will reflect this. 73, Evan -----Original Message----- From: Alterman, Peter (NIH/CIT) [E] <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Sent: Wed, 26 Mar 2008 9:04 am Subject: RE: [drakelist] PS L4/l7 "Alterman, Peter (NIH/CIT) [E]" made an utterance to the drakelist gang ---------------------------------------------------------------------- rating on the secondary of the L4 PS is 2500v. I see 2600v on my meter. Also 12v filaments on the 3-500Zs and 6.3v for the panel lights :-) ---------------------------- Peter Alterman, Ph.D. Asst. CIO, E-Authentication, NIH and Chair, Federal PKI Policy Authority Cell: 301-252-8846 From: Lars-Åke Jansson Sent: Sat 3/15/2008 7:03 AM To: [EMAIL PROTECTED] Subject: [drakelist] PS L4/l7 Hi, can anyone tell me the ratings on the secondary side of the transformer in the PS L4 and L7. 73 de SM6CGI/Lars Vad har Britney för sig? Kolla in senaste kändisnyheterna! MSN Kändisnytt ---------------------------------------------------------------------- Submissions: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net ----------------------------------------------------------------------
