Hello all, Anyone around Ohio have the equipment to properly align W4's and an MN4C ? Would really prefer to have the MN4C corrected first. Using my TR5 and not changing anything, working into a dummy load (oil can). One W4 (which I think I trust) shows 90 W ...was not driving full tilt, another W4 (Dayton style) shows 75 W and the MN4c which I have been using with a TR4c says 35 W....oh yeah the MN4C is another Dayton special. W4 manuals have an alignment procedure, MN4C does not and I don't have the equipment (per W4 manual) to do it anyway. Am thinking of taking the MN4C and adjusting the pot to an average of the W4's, of course that does nothing for the SWR readings. But then like all things the original adjustment can't be that far off probably there is a problem, which whatever it is ...is not apparent. All appears original, both diodes appear functional with forward bias at .319 & .310 (mv) restpectively. Carl Hibbard WD8NHK Wife once again (upon hearing me gripe) says "to many black boxes".
**************Get the scoop on last night's hottest shows and the live music scene in your area - Check out TourTracker.com! (http://www.tourtracker.com?NCID=aolmus00050000000112)
