My TR-7 won't lock onto frequency with the internal VFO selected. The only
way it will work is off the R-7 VFO. The frequency readout shows about 17900
Khz until you go to the R-7 VFO, then it locks on OK. At first I could correct
this problem by reseating boards but now that has no effect. Reseating the
boards only corrected the problem for a little while then it would go out
again. Can anyone offer any suggestions about where to look for this problem.
The
only way it will work now is off the R-7 VFO. I would appreciate any help
you can offer.
Thanks and 73,
Terry W8NJR
**************A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
(http://pr.atwola.com/promoclk/100000075x1215855013x1201028747/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%26bcd=De
cemailfooterNO62)
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
