Tim -
I've never tried it, but it should work, sorta.... :-)
The AM filter position has three resistors to match the filter
impedance, (apparently different than the CW/SSB filters?,) and most
likely to increase the insertion loss so that the output level stays
approximately the same when switching between the two types of filters.
So just plugging in the filter may work, but the passband may be
distorted and the output may increase considerably when switching to
AM. It certainly won't hurt anything to try.
I would say try just plugging it in, and let us know the results!
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 4-B, C-Line & TR-4/C Service Supplement CDs
<www.k4oah.com>
amfone wrote:
Hello
I have and R4C. If you install an AM filter in one of the CW slots
will in function properly? I already have a 4KC filter in the correct
AM slot but want to add an additional 6KC filter as well, the only
vacant slot is the CW slot.
Thanks Tim
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
