Jim Shorney wrote:
On Fri, 01 Jan 2010 15:33:00 -0500, Garey Barrell wrote:
Mike Bryce wrote:
One TR-4 the band switch is tight. Grease or oil, or ??
A drop of oil or Lithium grease on the detent assembly at the rear end
of the bandswitch. A drop of oil on the bushing through the front
panel. Should do it. Check the switch assembly hardware to ensure the
wafers are aligned properly.
I like the PTFE (Teflon) based oil that can be found (sometimes) at Ace
Hardware, or at Radio Shack for more money. Comes in a nerdy little pocket
oiler that will fit in your pocket protector.
I have one of those. Every time I go to use it, the Teflon(?) has all
settled into one end. It takes a considerable amount of tipping back
and forth to get it redistributed! Not the first thing I reach for
unless I have plenty of time!! :-)
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 4-B, C-Line& TR-4/C Service Supplement CDs
<www.k4oah.com>
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
