Hello all Quick question about the TR7 PBT/Reference Board. According to the manual I should have 40MHz on Pin 19. This pin is connected to a 470 Ohm Resistor then to coax and back to the Transistor. I should be able to measure 40MHz on this pin. I can do that fine.
The next step in alignmnet is 13.695MHz VCXO adjustment. According to the manual I should be able to connect a DFM to PIN 17 and adjust L1005 for exactly 53.695MHz (13.695 + 40MHz). On Pin 17 I cant measure anything. Zip. Although the RX is working fine. Are the Pin outs correct, and how did Drake number the edge connectors ? Top down or ??? Thanks Adrian MW1LCR _______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
