100+ watts out but T4 not going fully to standby mode. Idle current is ok same as before but it is still 'idling' with the TR relay in Receive. I can hear 'noise' in the receiver especially with the INJ cable plugged in. Not all the damage has been discovered.
Today I did find a short in one of the 'flea bay' tubes between Cathode and the 'middle' screen on pin 7. The R30 68 ohm 1/2 watt resistor is on pin 7 and it opened. The 100 5 Watt resistor in the AC4 opened this has been replaced with an on-hand 150 ohm 5 watt which is still running hot with the tubes in Filament fuse opened and has been replaced with proper fuse Will ck some more voltages tomorrow. -- Paul Gerhardt K3PG http://pgerhardt.blogspot.com QRP ARCI 6674 FP 274
_______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
