Hey Jim, for those of us who need a recap can you go over the whole process again. What was the reason and what was the solution?
Thanks, John -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jim K5JG Sent: Monday, April 12, 2010 5:48 PM To: Mail List - Drake Gear Drake Gear Subject: Re: [Drakelist] SPR-4 Freq Selector Dial OK. It looks like WD40 is the answer. Took less than 10 minutes and the dial is clean! Thanks to K8AC for suggesting it. 73, Jim K5JG Jim K5JG wrote: > I bought some Goo Gone yesterday and spent two hours trying to get the > residue off. Some of it loosened up and could be rubbed off, but there > remains a layer that acts almost like it has become one with the plastic. > > Other suggestions that have been received include lighter fluid or > Coleman stove fuel, and WD40. > > WD40 is water-based so I'll try it next and see how that goes. > > I'll post my results later. > > Thanks to all who sent me suggestions. > > 73, Jim K5JG _______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist _______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
