The Accy plug is for remote VFOs like Don said. Easiest thing is to get small 4PDT switch, and DPDT switch and wire jack etc for the mic and speaker respectively. Put this in a small metal box (grounded to the rig) and "swap" our mic and speaker with switches. The rig is too old to understand digital from a PC. Its only digital mode is CW (and for the die hards, RTTY from a real mill).
73, Ron WD8SBB --- On Thu, 7/29/10, Sanford Franzblau <[email protected]> wrote: From: Sanford Franzblau <[email protected]> Subject: [Drakelist] Wiring SignaLink USB interface To: [email protected] Date: Thursday, July 29, 2010, 12:52 PM I need instruction on what connections to make on the p-312-cct Cinch-Jones plug that goes into the Accessories receptacle on the rear of the Drake TR7 so that I can transmit digital output from a Tigertronics SignaLink USB unit. At present I disconnect my mic and plug in the SignaLink unit to the mic input but if I can use the rear accessory input for digital, I could readily use the voice mic when desired without moving plugs. Specifically: Which wires from the SignaLink go to which numbered posts on the Jones plug? Guidance would be appreciated. Thanks. Sandy KA9BBV -----Inline Attachment Follows----- _______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
_______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
