Hunter, I had a similar problem many years ago. It turned out to be the wrong crystal in the FS-4. The fellow I purchased it from was using it to control a SPR-4 receiver and I was using it to try and control R-4C frequencies. Changing to the proper interface crystal solved the problem.
GL, Bob, K1NOK PS Hunter, check the crystal frequencies below for the FS-4 to operate with the R-4C. R-4 and T-4X 9.6 Mhz crystal SPR-4 9.59 Mhz crystal 2-C 9.5 Mhz crystal and add 7 Mhz. to FS-4 readout for proper frequency. ----- Original Message ----- From: Hunter Ellington To: [email protected] Sent: Thursday, October 07, 2010 6:19 PM Subject: [Drakelist] FS-4 Anomally Well, I managed to make a cable to hook my FS-4 up to my R-4C. For some reason, when the FS-4 is controlling the radio, the received signals appear to be 9 Khz higher on the radio's dial than when the receiver PTO is controlling. Any thoughts? K0GFY R. Hunter Ellington 303-454-0543/720-560-8139 P.O. Box 44 Larkspur, CO 80118 ------------------------------------------------------------------------------ _______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
_______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
