Richard,
Great Question, It does not appear to make a difference , same results driving into dummy load as antenna (& tuner) or the untuned input to the Dentron Clipperton-L amplifier.I have a wattmeter at the input to the amplifier and a seperate one at the output of the amplifier. Don ----- Original Message ----- Message: 2 Date: Fri, 19 Nov 2010 12:04:25 -0800 From: "Richard Knoppow" <[email protected]> To: <[email protected]> Subject: Re: [Drakelist] T-4XC Low Power Output on 160M Message-ID: <65f091b2c86a4debbd4438cb96cb3...@valued20606295> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original What are you testing into, a dummy load or something else? - Richard Knoppow Los Angeles WB6KBL [email protected] ------------------------------ Message: 3 Date: Fri, 19 Nov 2010 15:30:17 -0500 From: "Wayne Rogers" <[email protected]> To: <[email protected]> Subject: [Drakelist] Soft-Start Module and Soft Key Mod for L4B Message-ID: <c8b288c732fe48f29ed106962a07f...@radioroom> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=response I have the Soft-key mod installed and just purchased the Soft-Start Module, which installs in the same location. Anyone know if there is a simple solution? I have a call in to Harbach - just though I'd ask here for a quick answer, since I have the Amp opened up on my bench. Thanks, Wayne N1WR ------------------------------ Message: 4 Date: Fri, 19 Nov 2010 14:16:59 -0800 (PST) From: Ron <[email protected]> To: [email protected], [email protected] Subject: Re: [Drakelist] T-4XC Low Power Output on 160M Message-ID: <[email protected]> Content-Type: text/plain; charset=us-ascii There was a "mod", I think in Ham Radio magazine, about adding a cap to the pi network on 160M to allow for proper tuning. Anyone know if this might be Don's issue? 73, Ron WD8SBB > > ----- Original Message ----- From: "Don Jones" <[email protected]> > To: <[email protected]> > Sent: Friday, November 19, 2010 11:21 AM > Subject: [Drakelist] T-4XC Low Power Output on 160M > > > > I have noticed that when loading up my T-4XC up on > 160M I am only able to > > get 45 - 50W out of my transmitter. Seems as though > the loading cap has > > insufficient range for proper tuning. The load control > is fully CCW. Is > > there a problem with the transmitter or does it just > need alignment? > > Thanks & 73, > > > > Don Jones KO7i > > Arlington, WA ------------------------------ Message: 5 Date: Fri, 19 Nov 2010 16:46:19 -0600 From: "T. David Cohen" <[email protected]> To: <[email protected]> Subject: [Drakelist] Q Multiplier Message-ID: <005101cb883b$95191c90$bf4b55...@net> Content-Type: text/plain; charset="us-ascii" I'm bringing back a recently acquired 2B and Q multiplier. The first of many questions - about how long should the shielded lead between the 2BQ and the receiver be (and what sort of coax?)? A previous owner did some 'work' on it. Thanks! Dave Cohen, N7TC -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mailman.zerobeat.net/pipermail/drakelist/attachments/20101119/ee65a56a/attachment-0001.html> ------------------------------ _______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist End of Drakelist Digest, Vol 29, Issue 26 *****************************************
_______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
