----- Original Message -----
From: "john" <[email protected]>
To: <[email protected]>
Sent: Tuesday, May 24, 2011 8:31 AM
Subject: [Drakelist] 2-C PS Cap replacement
Hi Darrel
I haven't seen Hayseed's kit or how it is installed on the
2-C, although I will need to eventually.
But many do work from the bottom on other rigs just to leave
the cans and all on top looking original if for no other
reason than nastalgia; certainly not deception, since you
are going to be so much better off in the end.
God bless
73
jb
kg6biw
His caps are cans and may be re-stuffed originals since
they have a seam at the top and wires soldered to the tabs.
The advantage is that they fit in the original space. New
caps can certainly be mounted under the chassis but in some
equipment they are hard to fit in. Much Drake stuff is very
tight inside.
--
Richard Knoppow
Los Angeles
WB6KBL
[email protected]
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
